ENC28J60 网络模块-单片机网络模块-原理图-C语言-C51-AVR-STM32-LPC程序

sydz · 发表于 2011-10-31 21:56:00

原理图

提供的程序 C51 AVR LPC STM32

C51程序

#include "uip.h"
#include "uip_arp.h"
//#include "rtl8019as.h"
#include "httpd.h"
//#include "telnet.h"
#include "mcu_uart.h"
#include "enc28j60.h"
#define BUF ((struct uip_eth_hdr *)&uip_buf[0])
#ifndef NULL
#define NULL (void *)0
#endif /* NULL */
/*-----------------------------------------------------------------------------------*/
int
main(void)
{
idata u8_t i, arptimer;
idata u16_t j;
init_uart();
printu("starting......\r\n");
/* Initialize the device driver. */
// rtl8019as_init();
dev_init();
uip_arp_init();
/* Initialize the uIP TCP/IP stack. */
uip_init();
printu("11111111111111111111111\r\n");
/* Initialize the HTTP server. */
httpd_init();
arptimer = 0;
printu("222222222222222222222222222\r\n");
while(1) {
/* Let the tapdev network device driver read an entire IP packet
into the uip_buf. If it must wait for more than 0.5 seconds, it
will return with the return value 0. If so, we know that it is
time to call upon the uip_periodic(). Otherwise, the tapdev has
received an IP packet that is to be processed by uIP. */
uip_len = dev_poll();
for(j=0;j<500;j++);
/*
if(uip_len > 0)
{
printuf("--------------- uip_len = 0x%x", uip_len);
printuf("%x ----------\r\n", uip_len);
for(i=0;i<uip_len;i++)
{
printuf("%x ", uip_buf[i]);
if((i+1)%16==0) printu("\r\n");
}
printu("\r\n");
}
*/
if(uip_len == 0) {
for(i = 0; i < UIP_CONNS; i++) {
uip_periodic(i);
/* If the above function invocation resulted in data that
should be sent out on the network, the global variable
uip_len is set to a value > 0. */
if(uip_len > 0) {
uip_arp_out();
dev_send();
}
}
#if UIP_UDP
for(i = 0; i < UIP_UDP_CONNS; i++) {
uip_udp_periodic(i);
/* If the above function invocation resulted in data that
should be sent out on the network, the global variable
uip_len is set to a value > 0. */
if(uip_len > 0) {
uip_arp_out();
dev_send();
}
}
#endif /* UIP_UDP */
/* Call the ARP timer function every 10 seconds. */
if(++arptimer == 20) {
uip_arp_timer();
arptimer = 0;
}
} else {
if(BUF->type == htons(UIP_ETHTYPE_IP)) {
uip_arp_ipin();
uip_input();
/* If the above function invocation resulted in data that
should be sent out on the network, the global variable
uip_len is set to a value > 0. */
if(uip_len > 0) {
uip_arp_out();
dev_send();
}
} else if(BUF->type == htons(UIP_ETHTYPE_ARP)) {
uip_arp_arpin();
/* If the above function invocation resulted in data that
should be sent out on the network, the global variable
uip_len is set to a value > 0. */
if(uip_len > 0) {
dev_send();
}
}
}
}
return 0;
}
/*-----------------------------------------------------------------------------------*/
void
uip_log(char *m)
{
// printf("uIP log message: %s\n", m);
}
/*-----------------------------------------------------------------------------------*/

复制代码

AVR程序

/*********************************************
* vim:sw=8:ts=8:si:et
* To use the above modeline in vim you must have "set modeline" in your .vimrc
* Author: Guido Socher
* Copyright: GPL V2
* See http://www.gnu.org/licenses/gpl.html
*
* Ethernet remote device and sensor
* UDP and HTTP interface
url looks like this http://baseurl/password/command
or http://baseurl/password/
*
* Chip type : Atmega88 or Atmega168 with ENC28J60
* Note: there is a version number in the text. Search for tuxgraphics
*********************************************/
#include <avr/io.h>
#include <stdlib.h>
#include <string.h>
#include <avr/pgmspace.h>
#include "ip_arp_udp_tcp.h"
#include "enc28j60.h"
#include "timeout.h"
#include "avr_compat.h"
#include "net.h"
// MAC 地址
static uint8_t mymac[6] = {0x54,0x55,0x58,0x10,0x00,0x24};
// IP 地址
static uint8_t myip[4] = {192,168,1,88};
// TCP WWW 服务监听端口
#define MYWWWPORT 80
// UDP 端口
#define MYUDPPORT 1200
#define BUFFER_SIZE 450
static uint8_t buf[BUFFER_SIZE+1];
// 下面是一个简单的密码验证
// 字符串 password 中存放密码
// 密码只能是 a-z,0-9,下划线，不大于9个字节，仅验证前5个字节
static char password[]="lcsoft"; // must not be longer than 9 char
// 验证密码
uint8_t verify_password(char *str)
{
// the first characters of the received string are
// a simple password/cookie:
if (strncmp(password,str,5)==0){
return(1);
}
return(0);
}
// takes a string of the form password/commandNumber and analyse it
// return values: -1 invalid password, otherwise command number
// -2 no command given but password valid
// -3 valid password, no command and no trailing "/"
int8_t analyse_get_url(char *str)
{
uint8_t loop=1;
uint8_t i=0;
while(loop){
if(password[i]){
if(*str==password[i]){
str++;
i++;
}else{
return(-1);
}
}else{
// end of password
loop=0;
}
}
// is is now one char after the password
if (*str == '/'){
str++;
}else{
return(-3);
}
// check the first char, garbage after this is ignored (including a slash)
if (*str < 0x3a && *str > 0x2f){
// is a ASCII number, return it
return(*str-0x30);
}
return(-2);
}
// answer HTTP/1.0 301 Moved Permanently\r\nLocation: password/\r\n\r\n
// to redirect to the url ending in a slash
uint16_t moved_perm(uint8_t *buf)
{
uint16_t plen;
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 301 Moved Permanently\r\nLocation: "));
plen=fill_tcp_data(buf,plen,password);
plen=fill_tcp_data_p(buf,plen,PSTR("/\r\nContent-Type: text/html\r\nPragma: no-cache\r\n\r\n"));
plen=fill_tcp_data_p(buf,plen,PSTR("<h1>301 Moved Permanently</h1>\n"));
plen=fill_tcp_data_p(buf,plen,PSTR("add a trailing slash to the url\n"));
return(plen);
}
// 填充 Web Page
uint16_t print_webpage(uint8_t *buf,uint8_t on_off)
{
uint16_t plen;
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\nPragma: no-cache\r\n\r\n"));
plen=fill_tcp_data_p(buf,plen,PSTR("<h1 align=center>LCSOT测试页面</h1><hr>"));
plen=fill_tcp_data_p(buf,plen,PSTR("<center><p>当前状态: "));
if (on_off){
plen=fill_tcp_data_p(buf,plen,PSTR("<font color="#00FF00"> 打开</font>"));
}else{
plen=fill_tcp_data_p(buf,plen,PSTR("关闭"));
}
plen=fill_tcp_data_p(buf,plen,PSTR(" <small><a href=".">[刷新]</a></small></p>\n<p><a href="."));
if (on_off){
plen=fill_tcp_data_p(buf,plen,PSTR("/0">关闭</a><p>"));
}else{
plen=fill_tcp_data_p(buf,plen,PSTR("/1">打开</a><p>"));
}
plen=fill_tcp_data_p(buf,plen,PSTR("</center><hr><p align=center>详细信息请访问：<a href="http://www.lcsoft.net">http://www.lcsoft.net</a></p>"));
return(plen);
}
int main(void){
uint16_t plen;
uint16_t dat_p;
uint8_t i=0;
uint8_t cmd_pos=0;
int8_t cmd;
uint8_t payloadlen=0;
char str[30];
char cmdval;
delay_ms(1);
/* enable PD2/INT0, as input */
DDRD&= ~(1<<DDD2);
/*initialize enc28j60*/
enc28j60Init(mymac);
enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
delay_ms(10);
// LED
/* enable PB1, LED as output */
DDRC|= (1<<DDC0);
/* set output to Vcc, LED off */
PORTC|= (1<<PC0);
// the transistor on PD7
DDRD|= (1<<DDD7);
PORTD &= ~(1<<PD7);// transistor off
/* Magjack leds configuration, see enc28j60 datasheet, page 11 */
// LEDB=yellow LEDA=green
//
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
// enc28j60PhyWrite(PHLCON,0b0000 0100 0111 01 10);
enc28j60PhyWrite(PHLCON,0x476);
delay_ms(20);
/* set output to GND, red LED on */
PORTC &= ~(1<<PC0);
i=1;
//init the ethernet/ip layer:
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
while(1){
// get the next new packet:
plen = enc28j60PacketReceive(BUFFER_SIZE, buf);
/*plen will ne unequal to zero if there is a valid
* packet (without crc error) */
if(plen==0){
continue;
}
// arp is broadcast if unknown but a host may also
// verify the mac address by sending it to
// a unicast address.
if(eth_type_is_arp_and_my_ip(buf,plen)){
make_arp_answer_from_request(buf);
continue;
}
// check if ip packets are for us:
if(eth_type_is_ip_and_my_ip(buf,plen)==0){
continue;
}
// led----------
if (i){
/* set output to Vcc, LED off */
PORTC|= (1<<PC0);
i=0;
}else{
/* set output to GND, LED on */
PORTC &= ~(1<<PC0);
i=1;
}
if(buf[IP_PROTO_P]==IP_PROTO_ICMP_V && buf[ICMP_TYPE_P]==ICMP_TYPE_ECHOREQUEST_V){
// a ping packet, let's send pong
make_echo_reply_from_request(buf,plen);
continue;
}
// tcp port www start, compare only the lower byte
if (buf[IP_PROTO_P]==IP_PROTO_TCP_V&&buf[TCP_DST_PORT_H_P]==0&&buf[TCP_DST_PORT_L_P]==MYWWWPORT){
if (buf[TCP_FLAGS_P] & TCP_FLAGS_SYN_V){
make_tcp_synack_from_syn(buf);
// make_tcp_synack_from_syn does already send the syn,ack
continue;
}
if (buf[TCP_FLAGS_P] & TCP_FLAGS_ACK_V){
init_len_info(buf); // init some data structures
// we can possibly have no data, just ack:
dat_p=get_tcp_data_pointer();
if (dat_p==0){
if (buf[TCP_FLAGS_P] & TCP_FLAGS_FIN_V){
// finack, answer with ack
make_tcp_ack_from_any(buf);
}
// just an ack with no data, wait for next packet
continue;
}
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
// head, post and other methods:
//
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\n\r\n<h1>200 OK</h1>"));
goto SENDTCP;
}
if (strncmp("/ ",(char *)&(buf[dat_p+4]),2)==0){
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\n\r\n"));
plen=fill_tcp_data_p(buf,plen,PSTR("<p>Usage: http://host_or_ip/password</p>\n"));
goto SENDTCP;
}
cmd=analyse_get_url((char *)&(buf[dat_p+5]));
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
if (cmd==-1){
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
if (cmd==1){
PORTD|= (1<<PD7);// transistor on
}
if (cmd==0){
PORTD &= ~(1<<PD7);// transistor off
}
if (cmd==-3){
// redirect to add a trailing slash
plen=moved_perm(buf);
goto SENDTCP;
}
// if (cmd==-2) or any other value
// just display the status:
plen=print_webpage(buf,(PORTD & (1<<PD7)));
//
SENDTCP:
make_tcp_ack_from_any(buf); // send ack for http get
make_tcp_ack_with_data(buf,plen); // send data
continue;
}
}
// TCP WWW 部分结束
// UDP 处理，监听端口 1200 = 0x4B0
if (buf[IP_PROTO_P]==IP_PROTO_UDP_V&&buf[UDP_DST_PORT_H_P]==4&&buf[UDP_DST_PORT_L_P]==0xb0){
payloadlen=buf[UDP_LEN_L_P]-UDP_HEADER_LEN;
// you must sent a string starting with v
// e.g udpcom version 10.0.0.24
if (verify_password((char *)&(buf[UDP_DATA_P]))){
// find the first comma which indicates
// the start of a command:
cmd_pos=0;
while(cmd_pos<payloadlen){
cmd_pos++;
if (buf[UDP_DATA_P+cmd_pos]==','){
cmd_pos++; // put on start of cmd
break;
}
}
// a command is one char and a value. At
// least 3 characters long. It has an '=' on
// position 2:
if (cmd_pos<2 || cmd_pos>payloadlen-3 || buf[UDP_DATA_P+cmd_pos+1]!='='){
strcpy(str,"e=no_cmd");
goto ANSWER;
}
// supported commands are
// t=1 t=0 t=?
if (buf[UDP_DATA_P+cmd_pos]=='t'){
cmdval=buf[UDP_DATA_P+cmd_pos+2];
if(cmdval=='1'){
PORTD|= (1<<PD7);// transistor on
strcpy(str,"t=1");
goto ANSWER;
}else if(cmdval=='0'){
PORTD &= ~(1<<PD7);// transistor off
strcpy(str,"t=0");
goto ANSWER;
}else if(cmdval=='?'){
if (PORTD & (1<<PD7)){
strcpy(str,"t=1");
goto ANSWER;
}
strcpy(str,"t=0");
goto ANSWER;
}
}
strcpy(str,"e=no_such_cmd");
goto ANSWER;
}
strcpy(str,"e=invalid_pw");
ANSWER:
make_udp_reply_from_request(buf,str,strlen(str),MYUDPPORT);
}
}
return (0);
}

复制代码

LPC C程序

/*
* LPC2103开发板测试程序
*
* 用途：5110液晶+ENC28J60网络模块测试程序
*
*/
#include <stdio.h>
#include <LPC2103.h>
#include <string.h>
#include "ip_arp_udp_tcp.h"
#include "enc28j60.h"
#include "net.h"
#include "PCD5544.h"
#define LED ( 1 << 17 ) //P0.17控制LED
#define PSTR(s) s
extern void delay_ms(unsigned char ms);
static uint8_t mymac[6] = {0x54,0x55,0x58,0x10,0x00,0x24};
static uint8_t myip[4] = {192,168,1,88};
#define MYWWWPORT 80
#define MYUDPPORT 1200
#define BUFFER_SIZE 1500
static uint8_t buf[BUFFER_SIZE+1];
static char password[]="lcsoft";
uint8_t verify_password(char *str)
{
if (strncmp(password,str,5)==0){
return(1);
}
return(0);
}
int8_t analyse_get_url(char *str)
{
uint8_t loop=1;
uint8_t i=0;
while(loop){
if(password[i]){
if(*str==password[i]){
str++;
i++;
}else{
return(-1);
}
}else{
loop=0;
}
}
if (*str == '/'){
str++;
}else{
return(-3);
}
if (*str < 0x3a && *str > 0x2f){
return(*str-0x30);
}
return(-2);
}
uint16_t moved_perm(uint8_t *buf)
{
uint16_t plen;
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 301 Moved Permanently\r\nLocation: "));
plen=fill_tcp_data(buf,plen,password);
plen=fill_tcp_data_p(buf,plen,PSTR("/\r\nContent-Type: text/html\r\nPragma: no-cache\r\n\r\n"));
plen=fill_tcp_data_p(buf,plen,PSTR("<h1>301 Moved Permanently</h1>\n"));
plen=fill_tcp_data_p(buf,plen,PSTR("add a trailing slash to the url\n"));
return(plen);
}
uint16_t print_webpage(uint8_t *buf,uint8_t on_off)
{
uint16_t plen;
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\nPragma: no-cache\r\n\r\n"));
plen=fill_tcp_data_p(buf,plen,PSTR("<h1 align=center>LCSOFT测试页面</h1><hr>"));
plen=fill_tcp_data_p(buf,plen,PSTR("<center><p>当前状态: "));
if (on_off){
plen=fill_tcp_data_p(buf,plen,PSTR("<font color="#00FF00">开启</font>"));
}else{
plen=fill_tcp_data_p(buf,plen,PSTR("关闭"));
}
plen=fill_tcp_data_p(buf,plen,PSTR(" <small><a href=".">[刷新]</a></small></p>\n<p><a href="."));
if (on_off){
plen=fill_tcp_data_p(buf,plen,PSTR("/0">关闭</a><p>"));
}else{
plen=fill_tcp_data_p(buf,plen,PSTR("/1">开启</a><p>"));
}
plen=fill_tcp_data_p(buf,plen,PSTR("</center><hr><br><p align=center>更多信息请访问 <a href="http://www.lcsoft.net" target=blank>http://www.lcsoft.net\n"));
return(plen);
}
int main()
{
uint16_t plen;
uint16_t dat_p;
uint8_t i=0;
uint8_t cmd_pos=0;
int8_t cmd;
uint8_t payloadlen=0;
char str[30];
char cmdval;
enc28j60Init(mymac);
enc28j60clkout(2);
delay_ms(10);
IODIR |= LED;
IOSET = LED;
enc28j60PhyWrite(PHLCON,0xD76);
delay_ms(20);
IOCLR = LED;
i=1;
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
LCD_Init();
LCD_Cls();
LCD_GotoXY(0,0);
LCD_PrintStr("5110+ENC28J60");
LCD_GotoXY(0,1);
LCD_PrintStr("Lcsoft(C) 2010");
LCD_GotoXY(0,2);
LCD_PrintStr("--------------");
LCD_GotoXY(0,5);
LCD_PrintStr("--------------");
for(;;)
{
plen = enc28j60PacketReceive(BUFFER_SIZE, buf);
if(plen==0){
continue;
}
if(eth_type_is_arp_and_my_ip(buf,plen)){
static int icmpcount = 0;
char sip[15];
char sicmp[14];
sprintf(sip,"%u.%u.%u.%u",buf[ETH_ARP_SRC_IP_P],buf[ETH_ARP_SRC_IP_P+1],buf[ETH_ARP_SRC_IP_P+2],buf[ETH_ARP_SRC_IP_P+3]);
LCD_GotoXY(0,3);
LCD_PrintStr((unsigned char*)sip);
sprintf(sicmp,"Packets:%d",++icmpcount);
LCD_GotoXY(0,4);
LCD_PrintStr((unsigned char*)sicmp);
make_arp_answer_from_request(buf);
continue;
}
if(eth_type_is_ip_and_my_ip(buf,plen)==0){
continue;
}
if (i){
IOSET = LED;
i=0;
}else{
IOCLR = LED;
i=1;
}
if(buf[IP_PROTO_P]==IP_PROTO_ICMP_V && buf[ICMP_TYPE_P]==ICMP_TYPE_ECHOREQUEST_V){
static int icmpcount = 0;
char sip[15];
char sicmp[14];
sprintf(sip,"%u.%u.%u.%u",buf[IP_SRC_P],buf[IP_SRC_P+1],buf[IP_SRC_P+2],buf[IP_SRC_P+3]);
LCD_GotoXY(0,3);
LCD_PrintStr((unsigned char*)sip);
sprintf(sicmp,"Packets:%d",++icmpcount);
LCD_GotoXY(0,4);
LCD_PrintStr((unsigned char*)sicmp);
make_echo_reply_from_request(buf,plen);
continue;
}
if (buf[IP_PROTO_P]==IP_PROTO_TCP_V&&buf[TCP_DST_PORT_H_P]==0&&buf[TCP_DST_PORT_L_P]==MYWWWPORT){
if (buf[TCP_FLAGS_P] & TCP_FLAGS_SYN_V){
make_tcp_synack_from_syn(buf);
continue;
}
if (buf[TCP_FLAGS_P] & TCP_FLAGS_ACK_V){
init_len_info(buf);
dat_p=get_tcp_data_pointer();
if (dat_p==0){
if (buf[TCP_FLAGS_P] & TCP_FLAGS_FIN_V){
make_tcp_ack_from_any(buf);
}
continue;
}
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\n\r\n<h1>200 OK</h1>"));
goto SENDTCP;
}
if (strncmp("/ ",(char *)&(buf[dat_p+4]),2)==0){
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\n\r\n"));
plen=fill_tcp_data_p(buf,plen,PSTR("<p>Usage: http://host_or_ip/password</p>\n"));
goto SENDTCP;
}
cmd=analyse_get_url((char *)&(buf[dat_p+5]));
if (cmd==-1){
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
if (cmd==1){
IOCLR = LED;
i = 1;
LCD_GotoXY(0,4);
LCD_PrintStr("STATUS:ON ");
}
if (cmd==0){
IOSET = LED;
i = 0;
LCD_GotoXY(0,4);
LCD_PrintStr("STATUS:OFF");
}
if (cmd==-3){
plen=moved_perm(buf);
goto SENDTCP;
}
plen=print_webpage(buf,(i));
SENDTCP:
make_tcp_ack_from_any(buf);
make_tcp_ack_with_data(buf,plen);
continue;
}
}
if (buf[IP_PROTO_P]==IP_PROTO_UDP_V&&buf[UDP_DST_PORT_H_P]==4&&buf[UDP_DST_PORT_L_P]==0xb0){
payloadlen=buf[UDP_LEN_L_P]-UDP_HEADER_LEN;
if (verify_password((char *)&(buf[UDP_DATA_P]))){
cmd_pos=0;
while(cmd_pos<payloadlen){
cmd_pos++;
if (buf[UDP_DATA_P+cmd_pos]==','){
cmd_pos++;
break;
}
}
if (cmd_pos<2 || cmd_pos>payloadlen-3 || buf[UDP_DATA_P+cmd_pos+1]!='='){
strcpy(str,"e=no_cmd");
goto ANSWER;
}
if (buf[UDP_DATA_P+cmd_pos]=='t'){
cmdval=buf[UDP_DATA_P+cmd_pos+2];
if(cmdval=='1'){
IOCLR = LED;
strcpy(str,"t=1");
goto ANSWER;
}else if(cmdval=='0'){
IOSET = LED;
strcpy(str,"t=0");
goto ANSWER;
}else if(cmdval=='?'){
if (IOPIN & LED){
strcpy(str,"t=1");
goto ANSWER;
}
strcpy(str,"t=0");
goto ANSWER;
}
}
strcpy(str,"e=no_such_cmd");
goto ANSWER;
}
strcpy(str,"e=invalid_pw");
ANSWER:
make_udp_reply_from_request(buf,str,strlen(str),MYUDPPORT);
}
}
}

复制代码

程序：

STM32.zip (474.7 KB, 下载次数: 60)

LPC.zip (152.74 KB, 下载次数: 27)

AVR.zip (68.38 KB, 下载次数: 24)

51.zip (327.35 KB, 下载次数: 65)
原理图：

ENC28J60.pdf (177.96 KB, 下载次数: 690)

相关资料：

帐号		自动登录	找回密码
密码			立即注册

ENC28J60 网络模块-单片机网络模块-原理图-C语言-C51-AVR-STM32-LPC程序

相关帖子